AS69RC Valve Body Diagram: Dampers, Solenoids & Bolt Locations

AS69RC Valve Body Diagram: Dampers, Solenoids & Bolt Locations

Nathaniel ValentinNovember 17, 2026

Prefer to print? Download the printable AS69RC Valve Body Diagram PDF — article and original diagrams.

DRIVETRAIN 101 · ORIGINAL KIT INSTRUCTION DIAGRAMS

This AS69RC valve body diagram guide brings together the original illustrations from the Next Gen Drivetrain® ASRC-VBUK2 instructions. Use the assembled views to identify fasteners and the internal views to locate the K1 accumulator, clutch dampers, solenoids and pressure-regulator circuits. Each diagram opens at full size, and the printable version keeps the same explanations beside the illustrations.

Application note: The illustrations are labeled AS69RC. The kit listing also links this guide for AS66RC and A466ND applications; compare the actual casting, plate and kit before carrying over an AS69RC location to another application.

1. How to read the AS69RC diagrams

Begin with the complete lower and upper views. Then match the upper-right, upper-left, lower-right or lower-left internal view to the face of the casting on your bench. “Right” and “left” refer to the pictured orientation, not the side of the vehicle.

A solenoid is an electrically operated component; a control valve is the hydraulic valve inside the casting. The guide shows both, but a label identifying a component does not by itself establish that the component has failed. Keep the original solenoids, retainers and fasteners organized by location.

2. Complete valve body and bolt locations

The lower assembled view distinguishes valve-body-to-case fasteners and the filter location. The upper assembled view maps the bolts that hold the assembly together. Use each image’s own color and shape legend; the symbols are not interchangeable between different transmission guides.

The guide calls attention to flanged fasteners and bolts that also secure steel brackets or other components. Bolt head appearance alone is not a substitute for matching the pictured location and original fastener. Photograph both faces before removing hardware.

AS69RC Valve Body Diagram: Complete lower view: case mounting bolts, filter location and fastener legend.
Diagram 1. Complete lower view: case mounting bolts, filter location and fastener legend. Source: ASRC-VBUK2_Instructions instructions, PDF page 5.Open full-size diagram.
AS69RC Valve Body Diagram: Complete upper view: valve body assembly bolt locations.
Diagram 2. Complete upper view: valve body assembly bolt locations. Source: ASRC-VBUK2_Instructions instructions, PDF page 6.Open full-size diagram.

3. Upper valve body: accumulator, dampers and pressure circuits

The upper-right view identifies the large K1 accumulator separately from the smaller B2 damper. It also shows the SLT damper, K1 apply control and boost valves, modulator valve, and clutch apply relay valves. Do not treat every part labeled “damper” as a kit replacement location.

For the current five-small-plug plus one-large-plug kit, the small locations are K1, K2, K3, B1 and B2; the large plug corresponds to the separate K1 accumulator. The SLT damper is not one of those five small locations. The upper-left view is the reference for the lockup circuit, B2 control circuit and secondary pressure-regulator assembly.

Kit location Diagram reference
K1 and K2 small dampers Lower-right view; backing-plate area
K3 and B1 small dampers Lower-left view
B2 small damper Upper-right view
Large K1 accumulator Upper-right view; separate from the K1 small damper
AS69RC Valve Body Diagram: Upper-right view: K1 accumulator, B2 and SLT dampers, and clutch apply valves.
Diagram 3. Upper-right view: K1 accumulator, B2 and SLT dampers, and clutch apply valves. Source: ASRC-VBUK2_Instructions instructions, PDF page 7.Open full-size diagram.
AS69RC Valve Body Diagram: Upper-left view: B2, lockup and secondary pressure-regulator valve assemblies.
Diagram 4. Upper-left view: B2, lockup and secondary pressure-regulator valve assemblies. Source: ASRC-VBUK2_Instructions instructions, PDF page 8.Open full-size diagram.

4. Lower valve body: solenoids and remaining damper locations

The lower-right diagram names the linear solenoids, shift solenoid and pressure switch, and locates the K1 and K2 dampers. The lower-left diagram shows the K3 and B1 dampers, manual valve, primary pressure regulator and B1 apply control assembly.

The manual valve must engage the transmission’s shift linkage during reinstallation. Its location in a diagram is useful for identification, but linkage engagement still needs to be checked on the actual assembly. Preserve the position and orientation of the damper retainers as parts are removed.

AS69RC Valve Body Diagram: Lower-right view: solenoid identification, pressure switch and K1/K2 dampers.
Diagram 5. Lower-right view: solenoid identification, pressure switch and K1/K2 dampers. Source: ASRC-VBUK2_Instructions instructions, PDF page 9.Open full-size diagram.
AS69RC Valve Body Diagram: Lower-left view: manual valve, primary pressure regulator and K3/B1 dampers.
Diagram 6. Lower-left view: manual valve, primary pressure regulator and K3/B1 dampers. Source: ASRC-VBUK2_Instructions instructions, PDF page 10.Open full-size diagram.

5. Using the diagrams with the upgrade kit

Use the diagrams to identify the affected bores before installing the Next Gen Drivetrain® PulseDelete™ components. The current kit listing and contents page identify five small damper delete plugs, one large accumulator delete plug and a separator plate.

The guide’s installation text also contains a secondary pressure-regulator replacement step, while that assembly is not listed in the current kit contents. Confirm the instructions for the parts supplied with your order before performing that step. A pictured valve is not necessarily included in the kit.

Keep checkballs and springs in their documented positions, verify plate alignment, and follow the full instructions for fastener torque, fluid service and post-installation checks. The article is a diagram reference, not a replacement for the complete installation sequence.

6. Frequently asked questions

6.1 Is the K1 damper the same part as the K1 accumulator?

No. The guide labels a small K1 damper in the lower valve body and a separate large K1 accumulator in the upper valve body. They use different kit components.

6.2 Does this show every component included in the kit?

The diagrams show the valve body’s existing components as well as upgrade locations. Use the current product listing and kit contents page to identify what is supplied.

6.3 Can the AS69RC diagrams diagnose a shifting problem?

They help identify the circuits and components to inspect. Diagnosis still requires the symptoms, codes, fluid condition and appropriate hydraulic or electrical checks.

7. Kit and complete installation instructions

Find the matching kit and installation guide

Use the current product listing to confirm application and kit contents. Follow the complete instructions for disassembly, installation, torque and final checks.

View the AS69RC Valve Body upgrade kit

Use these guides to connect the component locations above with symptoms, diagnosis and upgrade choices.

Prepared from the linked Next Gen Drivetrain® instructions and product listing on November 17, 2026. Original diagram labels are preserved; some pages are rotated for reading. This educational reference accompanies the complete kit instructions. © Next Gen Drivetrain. All rights reserved.

Leave a comment

Please note, comments must be approved before they are published