AS68RC Valve Body Diagram: Checkballs, Valves & Bolt Maps

AS68RC Valve Body Diagram: Checkballs, Valves & Bolt Maps

Nathaniel ValentinNovember 17, 2026

Prefer to print? Download the printable AS68RC Valve Body Diagram PDF — article and original diagrams.

DRIVETRAIN 101 · ORIGINAL KIT INSTRUCTION DIAGRAMS

Use this AS68RC valve body diagram reference to identify the upper and lower castings, solenoids, checkball assemblies, control valves and case seals. The six original illustrations come from the Next Gen Drivetrain® ASRC-VBUK1 installation guide, with a printable version for the workbench.

Application note: This article follows the AS68RC guide. Its upper-body drawing identifies Dodge and Mitsubishi casting numbers. Match the actual valve body and supplied kit before using the drawings as an assembly reference.

1. Start with the assembled valve body

The lower assembled view contains the solenoids, pressure switches, temperature sensor and detent spring. The upper assembled view locates the manual valve and drain checkball. These external views are the starting point for orienting the internal diagrams.

The fastener legends distinguish lengths and mounting functions. Some bolts retain more than one item, so keep the brackets, sensor attachment and detent hardware with their original fasteners. A bolt fitting through a hole does not establish that its length is correct.

AS68RC Valve Body Diagram: Lower assembled valve body: fastener lengths, solenoids, pressure switches and temperature sensor.
Diagram 1. Lower assembled valve body: fastener lengths, solenoids, pressure switches and temperature sensor. Source: ASRC-VBUK1 instructions, PDF page 5.Open full-size diagram.
AS68RC Valve Body Diagram: Upper assembled valve body: bolt map, manual valve, drain checkball and casting identification.
Diagram 2. Upper assembled valve body: bolt map, manual valve, drain checkball and casting identification. Source: ASRC-VBUK1 instructions, PDF page 6.Open full-size diagram.

2. Upper internal valve layout

The upper internal diagram identifies the combined drain valve, gain change valve, line-pressure blow-off, modulator valve and shift valves 1 through 3. It also marks the filter screen and the small assemblies inside the channel plate.

The drawing calls out a retainer that installs sideways. Treat that orientation note as part of the diagram: retaining hardware is not simply interchangeable because two pieces look alike. Remove small components individually and keep their positions documented.

AS68RC Valve Body Diagram: Upper internal view: shift valves, modulator valve, filter screen and retainer orientation.
Diagram 3. Upper internal view: shift valves, modulator valve, filter screen and retainer orientation. Source: ASRC-VBUK1 instructions, PDF page 7.Open full-size diagram.

3. Lower internal layout and control-valve shims

The lower internal view identifies the lockup control valve, shift valve 4 and the three control-valve assemblies. The guide specifically notes that C-clips serve as calibration shims for those control valves. Preserve the original number and placement for each assembly.

The lower-body upgrade locations use three long and two short accumulator replacement plugs in the current kit. These locations are distinct from the case accumulators shown later. Use the actual component length and the guide’s location together when identifying each position.

AS68RC Valve Body Diagram: Lower internal view: control-valve assemblies, lockup circuit and the factory shim warning.
Diagram 4. Lower internal view: control-valve assemblies, lockup circuit and the factory shim warning. Source: ASRC-VBUK1 instructions, PDF page 8.Open full-size diagram.

4. Auxiliary channel plate and checkball assemblies

The lower outside view shows the auxiliary plate area and two checkball assemblies. These are assemblies containing more than a loose ball; preserve the cup, spring and ball relationship shown by the guide.

The current Next Gen Drivetrain® billet auxiliary channel plate and separator plates replace the corresponding factory pieces. The guide says the supplied separator plates do not use gaskets. Its installation procedure also identifies a special lower torque for one auxiliary-plate fastener, so do not apply one blanket torque to every bolt.

AS68RC Valve Body Diagram: Lower outside view: auxiliary channel plate, checkball assemblies and protruding retainer.
Diagram 5. Lower outside view: auxiliary channel plate, checkball assemblies and protruding retainer. Source: ASRC-VBUK1 instructions, PDF page 9.Open full-size diagram.

5. Case seals, accumulators and filter spacer

The case illustration identifies the case accumulators and case seals above the valve body. These parts are outside the lower casting shown in the internal valve diagrams; confusing the two locations can lead to a missed step during installation.

The guide’s installation procedure calls for removing the three case accumulators and springs, verifying the four case seals, and engaging the manual valve with the detent-lever track. Follow the procedure for the specific kit supplied.

The Next Gen Drivetrain® filter spacer belongs at the billet auxiliary channel plate’s filter mounting point. The guide describes it as tapered and fitting correctly in one direction. Confirm it is installed before tightening the filter fastener.

AS68RC Valve Body Diagram: Transmission case view: case accumulator locations and sealing interfaces.
Diagram 6. Transmission case view: case accumulator locations and sealing interfaces. Source: ASRC-VBUK1 instructions, PDF page 10.Open full-size diagram.

6. Frequently asked questions

6.1 Can I use this as an AS69RC valve body diagram?

No. The AS68RC and AS69RC use different diagram sets and kit layouts. Use the guide for the transmission and kit in front of you.

6.2 Why do the control-valve C-clips matter?

The AS68RC instructions identify them as factory calibration shims. Returning the original number to each control-valve assembly preserves that documented configuration.

6.3 Does the diagram show the filter spacer?

The case and auxiliary-plate drawings establish the relevant locations; the complete guide’s reinstallation section explains the tapered filter spacer and includes its installation illustration.

7. Kit and complete installation instructions

Find the matching kit and installation guide

Use the current product listing to confirm application and kit contents. Follow the complete instructions for disassembly, installation, torque and final checks.

View the AS68RC Valve Body upgrade kit

Use these guides to connect the component locations above with symptoms, diagnosis and upgrade choices.

Prepared from the linked Next Gen Drivetrain® instructions and product listing on November 17, 2026. Original diagram labels are preserved; some pages are rotated for reading. This educational reference accompanies the complete kit instructions. © Next Gen Drivetrain. All rights reserved.

Leave a comment

Please note, comments must be approved before they are published