Prefer to print? Download the printable 6R80 Valve Body Diagram PDF — article and original diagrams.
DRIVETRAIN 101 · ORIGINAL KIT INSTRUCTION DIAGRAMS
This 6R80 valve body diagram reference collects the bolt map, case-seal illustration and pulse-dampener location drawing from the Next Gen Drivetrain® F6R-VBUK1 instructions. The printable PDF keeps those references together for identification and kit planning.
Application note: The published installation guide is labeled Ford 6R80, 2015-present, F6R-VBUK1. The product family also includes other 6R applications and variants; confirm separate instructions for earlier 6R80, 6R60 or 6R100 configurations before using this diagram set.
1. What this 6R80 reference covers
The guide provides a complete-assembly fastener map and a targeted internal illustration for the pulse dampeners. It does not provide a universal exploded map of every valve or checkball for every 6R version.
Its instructions explicitly warn that multiple valve-body layouts exist. Photograph both channel-plate halves when they are separated so that the actual assembly has its own component-location record. Do not substitute a diagram from a visually similar unit for that record.
2. Bolt diagram: case bolts and channel-plate bolts
The source bolt map uses red for valve-body-to-case bolts and blue for channel-plate bolts. It identifies Torx 30 for the red group and Torx 27 for the blue group, with different tightening-order instructions for the two groups.
The red case-bolt group uses the numbered order in the diagram. The blue channel-plate group is tightened from the center outward. The guide states 75 inch-pounds for these valve-body bolts; that value is not a specification for every fastener elsewhere on the transmission.
| Diagram marking | Meaning in this guide |
|---|---|
| Red / Torx 30 | Valve-body-to-case bolts; use the numbered sequence |
| Blue / Torx 27 | Channel-plate bolts; work from the center outward |
| 75 inch-pounds | Guide specification for the valve-body bolts shown |

3. Case seals and thermal-bypass components
The removal section illustrates the thermal bypass valve or blank plug and the sealing components above the valve body. These parts can become loose as the assembly is lowered; account for them during removal.
The guide notes that the cooling-system configuration determines the component in the thermal-bypass location. Its illustrations also identify the case bias spring, center support seals and case seal. Check the actual arrangement before reinstalling the valve body.

4. Six pulse-dampener locations
The internal drawing marks six pulse-dampener positions in orange along the pictured channel-plate edge. These are the targeted locations identified by the PulseDelete™ procedure, not a complete checkball map.
The guide directs removal of the six dampeners and states that they are not reinstalled with this kit procedure. That instruction belongs to the matching Next Gen Drivetrain® separator-plate upgrade; it should not be applied to an otherwise stock assembly without the correct kit and instructions.
The illustrated page also explains how to separate the upper half with the separator plate so that small parts remain contained. Record the contents of both halves before moving the plate further.

5. Separator plate, lead frame and final checks
The procedure includes removal of the molded lead-frame harness assembly and inspection of the foam seal around the connectors. Treat the lead frame and connector seals as separate checks from the hydraulic plate installation.
The supplied Next Gen Drivetrain® separator plate replaces the original plate and does not require gaskets at that interface according to the guide. Keep the remaining small components in their verified positions while rejoining the halves.
Use the complete manual for reverse-order assembly, case-seal retention, pan installation and fluid-level setting. If the original complaint involves an electrical fault, damaged lead frame or internal transmission damage, the location diagrams alone do not resolve that diagnosis.
6. Frequently asked questions
6.1 Is this a complete 6R80 checkball diagram?
No. This guide contains a bolt map, case-interface illustrations and the six pulse-dampener locations. It expressly warns that internal layouts vary and calls for photos of the actual halves.
6.2 Can I use the diagrams for an earlier 6R80?
The source guide is labeled 2015-present. Confirm the proper earlier-version instructions and kit before applying its procedure.
6.3 What do the orange circles identify?
They mark pulse-dampener locations in this guide. They should not be read as checkball positions.
7. Kit and complete installation instructions
Find the matching kit and installation guide
Use the current product listing to confirm application and kit contents. Follow the complete instructions for disassembly, installation, torque and final checks.
8. Related diagnosis and upgrade guides
Use these guides to connect the component locations above with symptoms, diagnosis and upgrade choices.
- Ford 6R80 / 6R100 / 6R60 Valve Body Upgrades: The Case for Targeted Prevention
- 6R80 Solenoid Problems
Prepared from the linked Next Gen Drivetrain® instructions and product listing on November 17, 2026. Original diagram labels are preserved; some pages are rotated for reading. This educational reference accompanies the complete kit instructions. © Next Gen Drivetrain. All rights reserved.