This is our Project Carbon™ version of the new General Motors 10 Speed 10L80-E Transmission. The coveted Project Carbon™ series of transmissions is now available for the tumultuous and unpredictable 10L80-E. One thing that should be noted about the GM 10L80-E is that this transmission is a fraternal twin of the Ford 10R80, although Ford is the mastermind behind most of the project.
In fact, this transmissions internal components are largely interchangeable with those of the Ford. Though this is a robust and durable transmission, it is inundated with easy to address problems that simply require some data analysis and technical understanding.
Our Project Carbon™ products are best for:
- Daily Driving
- Stock to High Power Increases
- Long-Lasting Clutch Materials
- Freeway Pulls and Street Racing
- Firm but Predictable Shifts
- Drag Racing
Our 10-Step Remanufacturing Process:
- The first step in our remanufacturing process is a complete and total disassembly and inspection of all internal components, including the torque converter, geartrain, hydraulics, clutches and/or electronics.
- All wear components, such as bushings, bearings, washers, gaskets, seals, O-Rings, clutches, steels and more, are thrown away regardless of their health or usability, even if brand new.
- An intense cleaning session using the highest quality cleaning agents available to modern manufacturing ensues, steam tanking and hand cleaning these parts for up to 8 hours.
- We begin our inspection of the few remaining core hard parts to ensure that they are 100% re-usable, unworn and undamaged. Should a core part (such as a case) be irreparably deficient or unusable, it is properly discarded and replaced with a brand new one.
- At this point, the assembly process begins. All components consistent with your build sheet are staged and the proper machining, assembly and calibration of the product begins.
- Upon completion of all assembly, applicable components are individually tested on their respective machinery to ensure proper function and integrity, specifically hydraulics and electronics.
- At this point, final assembly begins. All pre-assembled internal components are then completed within the case, tested and forwarded to quality assurance.
- Prior to leaving our facility, a separate team member then inspects the final product, ensuring that the product matched the build sheet, and finishing touches like sensors or pan bolts are retorqued to assure future success for our product.
- At this point, the completed transmission is crated, the logistics of delivering your product are coordinated, and the item will proceed to shipping to prepare for embark to it’s new home.
- Upon completion of the 9 previous steps, you will receive notification of the product’s completion, passage of our quality control measures, and tracking information once applicable!
Project Carbon™ 10L80-E Build Specifications:
- Project Carbon™ High Performance Billet Torque Converter
- Custom Stall Speed
- Billet CNC Machined Stator
- Triple Friction Friction Lockup Mechanism
- Billet Torque Converter Cover
- Billet Impeller Hub
- Billet Turbine Hub
- Billet Lockup Piston
- Raybestos GPZ Custom A Clutch Stackup
- Raybestos GPZ Custom B Clutch Stackup
- Raybestos GPZ Custom C Clutch Stackup
- Raybestos GPZ Custom D Clutch Stackup w/ Added Clutches
- Raybestos GPZ Custom E Clutch Stackup w/ Added Clutches
- Raybestos GPZ Custom F Clutch Stackup w/ Added Clutches
- Next Gen Drivetrain SpeedSync™ Laser Cut A Clutch Steels
- Next Gen Drivetrain SpeedSync™ Laser Cut B Clutch Steels
- Next Gen Drivetrain SpeedSync™ Laser Cut C Clutch Steels
- Next Gen Drivetrain SpeedSync™ Laser Cut D Clutch Steels
- Next Gen Drivetrain SpeedSync™ Laser Cut E Clutch Steels
- Next Gen Drivetrain SpeedSync™ Laser Cut F Clutch Steels
- Deep Transmission Pan
- OEM Solenoid Set
- OEM Speed Sensor Set
- OEM Internal Wiring Harness
- OEM Gasket & Seal Set
- OEM Filter Set
- OEM Bushing Set
- OEM Thorrington Roller Bearing Set
- Project Carbon High Pressure Oil Pump Assembly w/ Steel Pump Gear
- Project Carbon High Pressure Valve Body Assembly
- Modified Oil Pump Pressure Regulator Valve Shim
- Billet Steel Accumulator Piston Update
- Recalibrated Pressure Regulator Valve & Spring Assembly
- Recalibrated "A" Shift Valve & Spring Assembly
- Recalibrated "B" Shift Valve & Spring Assembly
- Recalibrated "E" Shift Valve & Spring Assembly
- Laser-Cut Bonded Separator Plate w/ Custom Oil Circuitry
- Steel Pressure Relief Check Ball Update
- Hardened Steel Oil Pump Gear
- Precision Flattening of all Mating Surfaces
- Coated Steel Pump Vein Update
- Precision Machining of Multiple Strategic Oil Vents into Upper Casting
- New OEM Pump Gear Shell
It's no secret that the GM 10L80-E Transmission was simply not prepared for life as it came from the factory. Clients seeking to run larger tires, tow frequently, implement tuning or any other strenuous addition to the vehicle are bound to see immediate inhibitions to the shift quality of the transmission and will be destined for repeated transmission failure. Our Project Carbon™ transmission is designed to resolve these concerns for clients whose priorities are a combination of power capability, longevity, shift quality and enhanced durability. Still have questions? Call in and speak to one of our experts!