PowerTech® 6L50-E w/ Billet Torque Converter (HP Unrated)

Next Gen Drivetrain, Inc.

 

Introduction to our PowerTech® 6L50-E:

     For those who may not know, the 6L50 is based on a very old and outdated platform of 6-Speed Torque Converter style RWD transmissions that were notorious for torque converter failure, internal crossleakage and overheating. This transmission was never designed for a diesel truck nor performance car, not even a smaller one at that. Our mission is to provide an alternative that indeed was.

Do You Need Fast & Easy Financing?

     
Next Gen Drivetrain™ proudly offers fast, easy and affordable instant financing. You can finance your order straight from your computer or phone in as little as 5 minutes through companies like Affirm, Katapult & Shop Pay Installments. Some options offer as low as 0% APR! To learn how, check out our EZ Financing guide below:

> Next Gen Drivetrain™ Fast & Easy Financing Guide




General Motors 6L50-E Product Resources:


- 6L50-E Transmissions
- 6L50-E Torque Converters
- 6L50-E Rebuild Kits
- 6L50-E Valve Bodies
- 6L50-E Parts


Popular Transmission Information Resources:

Top 5 Benefits of an Upgraded or Built Transmission
Calculating Torque Multiplication Factor, Why is it So Important?
Top 5 Ways to Extend the Life of a Factory Transmission


PowerTech® Products are Best For:

  • Stock to High Power Increases
  • Daily Driving
  • Slightly Firmer Than Stock Shifts
  • Fastest Shifting
  • Extreme Towing/Hauling
  • Extreme Commercial/Industrial Use
  • Ultra-High Longevity
  • Low Cost of Lifetime Maintenance
  • Lower Operating Temperatures
  • Extreme Off-Road Use
  • Freeway Pulls/Roll Racing
  • Drag Racing/Sled Pulling

Our 10-Step Transmission Remanufacturing Process:

  1. The first step in our remanufacturing process is a complete and total disassembly and inspection of all internal components, including the torque converter, geartrain, hydraulics, clutches and/or electronics.

  2. All wear components, such as bushings, bearings, washers, gaskets, seals, O-Rings, clutches, steels and more, are thrown away regardless of their health or usability, even if brand new.

  3. An intense cleaning session using the highest quality cleaning agents available to modern manufacturing ensues, steam tanking and hand cleaning these parts for up to 8 hours.

  4. We begin our inspection of the few remaining core hard parts to ensure that they are 100% re-usable, unworn and undamaged. Should a core part (such as a case) be irreparably deficient or unusable, it is properly discarded and replaced with a brand new one.

  5. At this point, the assembly process begins. All components consistent with your build sheet are staged and the proper machining, assembly and calibration of the product begins.

  6. Upon completion of all assembly, applicable components are individually tested on their respective machinery to ensure proper function and integrity, specifically hydraulics and electronics.

  7. At this point, final assembly begins. All pre-assembled internal components are then completed within the case, tested and forwarded to quality assurance.

  8. Prior to leaving our facility, a separate team member then inspects the final product, ensuring that the product matched the build sheet, and finishing touches like sensors or pan bolts are retorqued to assure future success for our product.

  9. At this point, the completed transmission is crated, the logistics of delivering your product are coordinated, and the item will proceed to shipping to prepare for embark to it’s new home.

  10. Upon completion of the 9 previous steps, you will receive notification of the product’s completion, passage of our quality control measures, and tracking information once applicable!

PowerTech® 6L50-E Build Specifications:

- Billet Triple Disk Torque Converter with Upgraded Lockup Clutch Assembly

- Chromoly Impeller Hub

- CNC Machined Stator

- Custom 4-5-6 Clutch Assembly w/ High Energy Frictions

- Cast Aluminum Deep Pan w/ Integrated Drain Plug

- Next Gen Drivetrain™ Project Carbon® Valve Body

- Next Gen Drivetrain™ Project Carbon® High Pressure Oil Pump

- OEM Solenoid Set

- OEM TEHCM (Brand New, NOT Remanufactured)

- OEM Speed Sensors

- Raybestos High Energy Friction Module

- Next Gen Drivetrain™ SpeedSync™ Steel Set

- Custom Center Support Feed Update (Prevents the crossleak that causes the common “shutter” condition)

- Billet Steel Clutch Regulator Valve

- Billet Steel Pressure Regulator Valve

- Billet Steel TCC Regulator Valve

- Billet Aluminum End Plug Set

Conclusion:

     Do not be fooled by counterfeit quality General Motors 6L50-E transmissions. Regardless of your application, Next Gen Drivetrain™ is committed to engineering and manufacturing the most reliable, high quality transmissions achievable for these complex and unique units. Still have questions? Call in and speak to an expert today!

Note: Some product photography may display optional add-ons such as custom powdercoating, adapters for specific vehicles or similar. For a precise list of parts and services included in this product, please consult the build specification sheet listed above. If you have absolutely any questions, please feel free to contact us directly. It is our privilege to serve you.