ZF PowerLine-8 Valve Body Upgrade Kit w/ PulseDelete™ (Lifetime Warranty)

Next Gen Drivetrain, Inc.

Installation instructions

Have your transmission code handy and contact Next Gen Drivetrain® for PowerLine 8 installation instructions. The kit installs with the transmission in the truck and requires no reprogramming. Budget approximately two to four hours, depending on experience.

Table of contents

  1. Protect your PowerLine from dampener leaks
  2. What’s in the kit
  3. Fitment
  4. Warranty and returns
  5. Frequently asked questions
  6. Technical resources

Protect your PowerLine from dampener leaks

Designed for disaster prevention. Reroute oil around the factory pulse dampeners before wear lets pressure escape.

The PowerLine valve body depends on sealed hydraulic passages to apply the clutches consistently. As the factory dampeners and sealing surfaces wear, fluid can escape internally when a clutch needs it most. Over time, inconsistent apply pressure can contribute to slipping, heat, and clutch wear.

Our Next Gen Drivetrain® PulseDelete™ steel separator plate reroutes fluid around the dampener circuits. The thicker plate also helps seal the valve body sections. You can address both areas in one service while the transmission is still healthy.

What’s in the kit

  • One Next Gen Drivetrain® laser-cut steel PulseDelete™ separator plate with revised oil passages

Fitment

Designed for the ZF PowerLine 8, including 2025-and-newer Ram HD trucks equipped with the 6.7L Cummins and 8AP1075 transmission. Confirm your transmission code before ordering.

Warranty and returns

Backed by our Lifetime Parts Warranty and 30-Day Money Back Guarantee. Qualifying returns are eligible for a full refund within 30 days of delivery, even after installation and use.

Frequently asked questions

How does one plate bypass the dampeners?
The revised plate routes pressurized fluid around the dampener circuits. The bypass is built into the plate’s passage layout.

How do I know whether it fits my truck?
Check the transmission code. If you’re unsure, send us your VIN and transmission identification so we can verify the application.

Should I wait until I notice a shift problem?
If prevention is your goal, install it while the transmission is still healthy. If shifts are already slipping or flaring, diagnose the cause first so you can identify any existing damage.

Engineered by Us, Proven by You.

Technical resources