Chrysler 68RFE / 66RFE / 65RFE / 545RFE Billet Valve Body Upgrade Kit with PulseDelete™
Installation instructions
Download the Next Gen Drivetrain® Chrysler RFE Billet Valve Body Upgrade Kit Installation Guide. Start with the valve body identification section and match the generation and check-ball layout before disassembly.
Table of contents
- Protect your RFE from hydraulic crossleaks
- What’s in the kit
- Fitment and installation
- Warranty and returns
- Frequently asked questions
- Technical resources
Protect your RFE from hydraulic crossleaks
Designed for disaster prevention. Address pressure loss at the switch valves, separator plate, and accumulators before it starts wearing out the clutch packs.
A factory RFE valve body can lose pressure in several places at once. Fluid can cross between passages at the separator plate, escape around a worn switch valve, or leak when the factory accumulator plate cracks. The result can be delayed engagement, inconsistent shifts, or a clutch that slips under load.
We engineer and manufacture the proprietary hard parts in-house. A thicker steel separator plate, switch-valve upgrades, and a Next Gen Drivetrain® billet accumulator girdle address those weak points in one service.
What’s in the kit
- Next Gen Drivetrain® Laser-cut steel separator plate, approximately three times as thick as the factory plate
- Next Gen Drivetrain® Billet steel solenoid switch valve end plug set
- Next Gen Drivetrain® Billet steel NeverLeak low/reverse switch valve
- Next Gen Drivetrain® Billet steel accumulator girdle
- Hardened accumulator girdle mounting bolts
- Steel accumulator girdle washers
- Next Gen Drivetrain® PulseDelete™ overdrive accumulator bypass
- Next Gen Drivetrain® PulseDelete™ low/reverse accumulator piston
- Next Gen Drivetrain® PulseDelete™ underdrive accumulator piston
- Next Gen Drivetrain® PulseDelete™ 2C accumulator piston
- Next Gen Drivetrain® PulseDelete™ 4C accumulator piston
- Replacement accumulator piston springs
- Next Gen Drivetrain® Billet steel spin-on filter screw conversion
- Optional Next Gen Drivetrain® billet channel plate with revised oil routing, when selected
Fitment and installation
Available for 68RFE, 66RFE, 65RFE, and 545RFE applications. The 68RFE options include Gen 1 with seven check balls, Gen 2 with five, and Gen 3 with seven and a reverse accumulator housing. If the transmission has been serviced or swapped, confirm the valve body configuration before ordering.
Warranty and returns
Backed by our Lifetime Parts Warranty and 30-Day Money Back Guarantee. Qualifying returns are eligible for a full refund within 30 days of delivery, even after installation and use.
Frequently asked questions
Is the Next Gen Drivetrain® billet channel plate included?
It’s an optional upgrade. Contact us if you want to add one or need help confirming which version fits.
Does the kit require a tune or quick-learn?
The kit is designed to work with the factory calibration and installs without a quick-learn when fitted to the existing valve body. Follow the instructions for your configuration.
Will it fix an RFE that already slips or has lost reverse?
It can help when testing isolates a leak or valve fault addressed by the kit. Burned clutches or damaged internal parts require repair.
Engineered by Us, Proven by You.