GM 10L80 / 10L90 / 10L60 Billet Valve Body Upgrade Kit with PulseDelete™

Next Gen Drivetrain, Inc.

Installation instructions

The Gen 2 guide covers the standard mechanical- and electronic-shift versions. If you ordered the dedicated Camaro variant, contact us to confirm the instructions for that kit.

Table of contents

  1. Protect your GM 10-speed from internal leaks
  2. What’s in the kit
  3. Fitment and installation
  4. Warranty and returns
  5. Frequently asked questions
  6. Technical resources

Protect your GM 10-speed from internal leaks

Designed for disaster prevention. Address pressure bleed-off and solenoid movement before they contribute to clutch wear.

When the line-pressure-control accumulator leaks or a solenoid shifts out of alignment, the valve body can lose the pressure or control it needs for consistent clutch application. You may feel a flare or uneven shift under load. Over time, extra slip can wear the clutches and turn a hydraulic problem into a rebuild.

We engineer and manufacture the proprietary components in-house. The kit pairs revised steel separator plates with billet hydraulic components and solenoid stabilizers selected for your valve body generation.

What’s in the kit

  • Laser-cut steel main valve body separator plate
  • Laser-cut steel cover plate separator plate
  • Laser-cut steel default-solenoid housing separator plate, where applicable
  • Billet steel O-ringed lube regulator valve
  • Lube regulator valve recalibration spring
  • Billet steel O-ringed end plugs, quantity varies by generation
  • Six billet solenoid stabilizer inserts
  • Billet latch valve A and its recalibration spring, Gen 1
  • Billet latch valve B and its recalibration spring, Gen 1
  • Billet latch valve E and its recalibration spring, Gen 1
  • Billet latch valve F and its recalibration spring, Gen 1
  • Billet feed-limit bypass plug for the high circuit, where applicable
  • Billet feed-limit bypass plug for the low circuit, where applicable
  • Feed-limit plug retaining roll pins, where applicable
  • Billet manual valve upgrade, on applicable mechanical-shift versions

Fitment and installation

Fits GM 10L80, 10L90, and 10L60 applications. Choose by model year, shifter type, and valve body configuration. There is also a dedicated 2019–2024 Camaro option. Budget approximately three hours.

Warranty and returns

Backed by our Lifetime Parts Warranty and 30-Day Money Back Guarantee. Qualifying returns are eligible for a full refund within 30 days of delivery, even after installation and use.

Frequently asked questions

Which version do I need?
Start with your model year and shifter type. If the valve body has been swapped or you’re unsure of its generation, contact us before ordering.

Does it fit the Allison 10L1000?
Choose the dedicated Allison 10L1000 kit for that transmission.

Will it fix a solenoid fault code?
The stabilizers help keep the solenoids aligned. A fault code can also come from an electrical problem or a failing solenoid, so verify the cause before replacing parts.

Engineered by Us, Proven by You.

Technical resources