Your 5R110 needs steady hydraulic pressure to keep its clutches holding when the truck is working. This kit addresses internal leak paths in the valve body, with our Next Gen Drivetrain® billet channel plate included. You upgrade the valve body you already own.
Designed for disaster prevention. Backed by a Lifetime No-Fault Warranty on kit components and a 30-Day Money Back Guarantee, even after installation and use.
Keep pressure where it belongs
A transmission can lose pressure without leaving a puddle in your driveway. Fluid can leak inside the valve body, past a separator gasket or a worn manual valve. When the clutches lose the pressure they need, they can slip. Slip creates heat, and enough heat can turn a valve body problem into a transmission rebuild.
Our Ford 5R110 / 5R110W kit tackles those leak paths at the valve body. The Next Gen Drivetrain® billet channel plate gives the fluid passages a rigid foundation. Steel separator plates and a Next Gen Drivetrain® billet steel transfer plate help keep oil in the right circuits. The upgraded manual valve and O-ringed plugs address other places pressure can escape.
We developed these parts from a decade of selling performance transmissions and studying why they fail. We engineer and manufacture our proprietary hard parts in-house, including precision components machined on our CNC Swiss lathe.
If your transmission is healthy, this is an opportunity to address known weak points before they cause more wear. That matters whether you tow a trailer, haul equipment, or just need your truck ready for Monday morning.
What comes in the kit
- One Next Gen Drivetrain® billet channel plate to support fluid routing and sealing inside the valve body.
- Two Next Gen Drivetrain® laser-cut steel separator plates, approximately five times as thick as the factory paper gaskets they replace.
- One Next Gen Drivetrain® ¼-inch billet steel transfer plate for a rigid sealing surface.
- One Next Gen Drivetrain® drop-in billet steel manual valve designed to reduce leakage and binding when you select a gear.
- Five Next Gen Drivetrain® billet steel anti-leak end plugs and five high-temperature O-rings to seal unused switch passages.
- Illustrated installation instructions and access to our Installation Hotline.
Fitment and installation
The kit fits all Ford 5R110 and 5R110W TorqShift transmissions. It upgrades your existing valve body with the transmission still in the truck. Plan on approximately three hours for installation.
The parts install without machining. The kit works with the factory calibration and does not require a tune or quick-learn. Follow the illustrated instructions, including the separator plate torque sequence. If you get stuck, our Installation Hotline can help you work through the job.
Want the upgrades already installed? Take a look at our assembled 5R110 billet valve body. Not sure which transmission you have? Contact us before ordering.
Warranty and returns
Every kit component carries our Lifetime No-Fault Warranty. If an included part fails, we will replace it under the warranty terms.
You also get a 30-Day Money Back Guarantee, even after installation and use. Install it, drive your truck, and decide for yourself. If you are unsatisfied, return the kit within 30 days of delivery for a full refund under our return policy.
Common questions
Are both billet plates included?
Yes. You get the Next Gen Drivetrain® billet channel plate and the Next Gen Drivetrain® ¼-inch billet steel transfer plate. The channel plate routes fluid through the valve body. The transfer plate provides a rigid sealing surface for the passages it serves.
Does it make sense if my truck still shifts well?
Yes. The kit is designed to address common leak paths while the clutches are still healthy. You do not have to wait for a shifting problem to consider the upgrade.
Will this fix slipping or delayed engagement?
It can help when valve body leakage or manual valve wear is the cause. Those symptoms can also come from other problems. If you have lost a gear, found friction material in the pan, or have ongoing slipping, diagnose the transmission first. This kit cannot repair burned clutches.
Will the shifts be harsh?
The goal is cleaner, more consistent shifts. Engagement may feel slightly firmer if the valve body was losing pressure before the upgrade.
Can I keep my transmission tune?
Yes. The kit works with the factory calibration or a compatible TCM tune.
Can these parts be reused during a rebuild?
Yes, if they pass inspection. Inspect the Next Gen Drivetrain® billet components, steel separator plates, and seals before putting them back into service.
Engineered by Us, Proven by You.
Learn more about your 5R110
- See how hydraulic leaks develop and what to check when your truck starts shifting differently. 5R110 Valve Body Problems Explained
- Learn how the TorqShift works and where its common failure points are. Ford 5R110W Transmission Problems, Solutions & Upgrades
- Use symptoms, pressure testing, and clutch condition to decide how far a repair needs to go. Valve Body Upgrade vs. Complete Build
- Explore upgrades for your engine and how you use your truck. 5R110 Upgrades for the 6.0L Power Stroke · 5R110 Upgrades for the 6.4L Power Stroke